| |
TM 10-3930-643-34
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE.
6-8.
Scheduling Valve and Control Valve. (Sheet 4 of 4)
INSTALLATION
13.
Using a 9/16" socket and socket
wrench handle,
install six
new
preformed packings (15), control
valve (14), six new preformed
packings (13), scheduling valve (12),
three washers (11) and bolts (10).
14.
Using 1/2" and
5/8”
open
end
wrenches, install air cylinder
(9)
and elbow (8) into
control
valve
(14).
15.
Using a 7/16" open end wrench,
connect tube (7) to elbow (8).
16.
Using a 7/8" open end wrench, install
union (6) to tee (19).
17. Connect tube (5) to union (6).
18.
Using long round nose pliers, install
pin (4), new cotter pin (3), pin (2)
and new cotter pin (l).
NOTE
Return M10A Forklift to
original
equipment condition.
END OF TASK
6-57
|
