| |
TM 10-3930-643-34
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE.
6-8.
Scheduling Valve and Control Valve. (Sheet 2 of 4)
REMOVAL
1.
Using long round nose pliers, remove
cotter pin (1), pin (2), cotter
pin
(3) and pin (4) from transmission.
Discard cotter pins (1 and 3).
NOTE
Tag all hose and tube assemblies
before disconnecting to aid in
installation.
2.
Using a 7/8" open end wrench,
disconnect tube (5).
3.
Remove union (6) from tee (19).
4.
Using a 7/16" open end wrench,
disconnect tube (7).
NOTE
Plug all ports in valves to
prevent entry of foreign material
or dirt.
5*
Using 1/2" and 5/8" open end
wrenches, remove elbow (8) and
air
cylinder (9) from control valve (14).
Go to sheet 3
6-55
|