| |
TM 10-3930-643-34
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE. (cont)
6-6.
Transmission Assembly. (Sheet 5 of 12)
REMOVAL (cont)
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
Using a 7/16" open end wrench,
disconnect hose assembly (34) from
transmission (53).
Using a 1-1/2" open end off set wrench
disconnect hose assembly (34a).
Remove union (35) and preformed
packing (36).
Discard preformed
packing (36).
Using a
7/8”
open
end
wrench,
disconnect hose assembly (37) from
control and scheduling
valve on
transmission (53).
Using a 13/16" open end wrench,
remove union
(38) and preformed
packing (39).
Discard preformed
packing (39).
Using long round nose pliers, remove
cotter pin (40) and pin (41).
Discard cotter pin (40).
Disconnect clevis (42).
Using a 9/16" socket and socket
wrench handle, remove four nuts (45a)
and bolts (45b).
Slide grommet (45c)
forward, away from bracket (50).
Remove cotter pin (43) and pin (44).
Discard cotter pin (43).
Disconnect clevis (45).
Using a 3/4" socket and socket wrench
handle, remove two bolts
(46),
washers (47), bolts (48) and washers
(49) from top of transmission (53).
Remove bracket (50).
Go to sheet 6
6-40
|
