| |
TM 10-3930-643-34
TRANSMISSION TROUBLESHOOTING
6-6.
Transmission Assembly.
REMOVAL
AND MAINTENANCE.
(Sheet 4 of 12)
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
Using a 1-1/2" open end wrench,
disconnect hose assembly (15).
Using a 1-3/8" open end wrench,
remove adapter (16).
Using a 1-1/2" open end wrench,
disconnect hose assembly (17) from
front, right side of transmission
(53).
Using a 5/8" open end wrench,
disconnect hose assembly (17a).
Using a pipe wrench, remove elbow
(18).
Using a 1-1/4" open end wrench,
disconnect hose assembly (22).
Using a 1-1/16" open end wrench,
remove elbow (23).
NOTE
All wire must
be tagged when
removed from connector.
Indicate
whether wire is
connected to
pin-type or socket-type connector.
Disconnect two wire assemblies
(24)
at terminals.
Using a 1" open and box end wrench,
remove switch (25), coupling (26)
and nipple (27).
Using a 9/16" socket and socket
wrench handle, remove two bolts (28),
washers (29) and bracket (30).
Using a 5/8" open end wrench,
disconnect tube assembly (31).
Using 3/4" and 9/16" open end
wrenches, remove
elbow (32) and
reducer (33).
Go to sheet 5
6-39
|
