| |
TM 10-3930-643-34
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE. (cont)
6-6.
Transmission Assembly. (Sheet 3 of 12)
REMOVAL (cont)
6.
Using a flat tip screwdriver, loosen
clamp (19).
7.
Disconnect hose assembly (20).
8.
Using a 1-3/8" open end wrench,
remove elbow (21).
9.
Using a pipe wrench, remove gage (4),
nipple (5) and elbow (6) from right
side of transmission (53).
10.
Using a 3/4" socket and socket wrench
handle, remove two bolts (7), washers
(8) and plate (9) from right side of
transmission (53).
11.
Remove two bolts (10), washers (11)
and plate (12) from left side of
transmission (53).
NOTE
Tag all hose and tube assemblies
before disconnecting to aid in
installation.
12.
Using a 1-1/2" open end wrench,
disconnect hose assembly (13) from
underneath transmission (53).
13.
Using a 1-3/8" open end wrench,
remove adapter (14).
GO to sheet 4
6-38
|
