| |
TM 10-3930-643-34
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE. (cont)
6-5.
Torque Converter and Transmission Hoses, Lines and Fittings. (Sheet 7 of
10)
INSTALLATION
37.
38.
39•
40.
41.
42.
43.
44.
45*
46.
47.
48.
Using a 1-1/2” open end wrench,
install hose
assembly (60) in
transmission oil cooler.
Install new preformed packing
(59)
and union (58) in transmission.
Using a 7/8” open end wrench, connect
hose assembly (60).
Using a 9/16” socket and socket
wrench handle,
install washer (57),
clamp (56), washer (55) and locknut
(54).
Using a 1-3/8” open end wrench and a
flat tip screwdriver, install nipple
(53), hose (52) and clamp (51) on
frame.
Using a 3/4” socket and socket wrench
handle, install clamp (50),
washer
(49) and bolt (48).
Connect hose
assembly (52) in
transmission.
Using a 3/8” open end wrench and flat
tip screwdriver, install elbow
(47)
and clamp (46).
Using 9/16” and 3/4” open end
wrenches, install adapter (45), elbo
(44), insert (43), tube (42) and nut
(41) in flywheel housing.
Connect tube (42) in transmission.
Install reducer (40), elbow (39),
insert (38) and nut (37).
Install three new tie straps (36).
Go to sheet 8
6-32
|
