| |
TM 10-3930-643-34
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE. (cont)
6-5.
Torque Converter and Transmission Hoses, Lines and Fittings. (Sheet 5 of
10)
REMOVAL (cont)
22.
Using side cutting pliers, cut and
discard three tie straps (36).
23.
Using 9/16" and 3/4" open end
wrenches, remove nut (37), insert
(38), elbow (39) and reducer (40).
24.
Disconnect tube assembly (42).
25.
Remove nut (41), tube (42), insert
(43), elbow (44) and adapter (45)
from flywheel housing.
26.
Using a flat tip screwdriver and
1-3/8" open end wrench, remove clamp
(46) and elbow
transmission.
27.
Disconnect hose assembly (52)
28.
Using a 3/4" socket and socket wrench
handle, remove bolt (48), washer (49)
and clamp (50)
from frame under
cradle.
29.
Using a flat tip screwdriver and
1-3/8” open end wrench, remove clamp
(51), hose (52) and nipple (53).
30,
Using a 9/16"
socket and socket
wrench handle, remove locknut (54),
washer (55), clamp (56) and washer
(57) from frame under converter.
31.
Disconnect hose assembly (60).
32.
Using a 1-1/2" open end wrench,
remove union (58) and preformed
packing (59).
Discard preformed
packing (59).
33.
Remove hose
assembly (60) from
transmission oil cooler.
Go to sheet 6
6-30
|
