TM  10-3930-643-34 ELECTRICAL  SYSTEM  MAINTENANCE.  (cont) 5-7. Front Lights Wiring Harness. (Sheet 6 of 7) INSTALLATION  (cont) 35. 36. 37. 38. 39• 40. 41. 42. 43. 44. 45. 46. 47. 48. Install two plugs (22) in front, left side of vehicle. Connect  wire  assembly  (21)  at terminal. Apply silicone sealant over entire connection. Install insulator (20). Connect wire assembly (19) at terminal. Apply silicone sealant over entire connection. Install insulator (18). Using slip joint pliers, install washer (17) and terminal (16). Connect wire assemblies (15 and 14) at shell and terminal. Apply silicone sealant over entire connection. Using a 3/8” open end wrench, install washer (13) and nut (12). Connect wire assemblies (11) at terminals. Apply silicone sealant over entire connection. Install two washers (10) and screws (9). Go to sheet 7 5-58