TM  10-3930-643-34 ELECTRICAL  SYSTEM  MAINTENANCE.  (cont) 5-5. Intermediate Wiring Harness (S/N 2000 and below). (Sheet 4 of 4) INSTALLATION  (cont) 20. Using a flat tip screwdriver, connect lead assembly (7) to transmission. Apply silicone sealant over entire connection. 21. Pull boot (6) over terminal. 22. Using a 3/8"   open  end  wrench,  connect lead assembly (5) to ground driven steering pump switch. 23. Using a 9/16" open end wrench, install clamp (4), washer (3) and nut (2). 24. Connect  harness  assembly  (16)  to  main harness in left, front hydraulic tank. 25. Connect lead assembly (11) to power cluster under right side of cab. 26. Install a suitable number of new tie straps (1) to secure harness assembly (16)  to  vehicle. NOTE Return M10A Forklift to original equipment  condition. END OF TASK 5-48