TM  10-3930-643-34 ELECTRICAL  SYSTEM  MAINTENANCE.  (cont) 5-5. Intermediate  Wiring  Harness  (S/N  2000  and This task covers: a.  Removal below). (Sheet 1 of 4) b. Installation INITIAL  SETUP Tools Tool  Kit,  General  Mechanic’s Automotive NSN   5180-00-177-7033 Materials/Parts Silicone sealant (App. C, Item 27) Small tag (App. C, Item 28) Tie strap Torques Except for special torques shown, all fasteners are tightened to a standard  torque. Refer to Appendix E. EQUIPMENT   CONDITION References TM  10-3930-643-20 Condition   Description Battery  negative  disconnected. REMOVAL NOTE For the following procedures, disconnect is used to indicate the separation of plugs , connectors  or  terminals  and  the removal  of all attaching hardware. To prevent loss, reinstall  attaching  hardware  in its  original  position. All  electrical  connections, except those on the instrument panel  are  sealed against moisture  with  silicone  sealant. Remove all silicone sealant before  performing  maintenance  on electrical  connections. Quantity of tie straps used to secure harness is variable. Go to sheet 2 5-45