| |
TM 10-3930-643-34
ELECTRICAL SYSTEM MAINTENANCE. (cont)
5-3.
Main Wiring Harness. (Sheet 15 of 15)
INSTALLATION (cont)
86.
87.
88.
89.
90.
91.
92.
93.
94.
95.
NOTE
The following is a difference
between M10A Forklift models.
Connect two wire assemblies (10) at
terminals to
backup alarm, from
vehicles S/N 2001 and above.
Apply silicone sealant over entire
connection.
Connect three wire assemblies (9) at
terminals to left stop
light and
taillight.
Apply silicone sealant over entire
connection.
Connect two wire assemblies (8 and 7)
at connectors to blackout lights.
Apply silicone sealant over entire
connection.
Connect three wire assemblies (6) at
terminals to right stop light
and
taillight.
Apply silicone sealant over entire
connection.
Using a 9/16” socket and socket
wrench handle, install four
clamps
(5), washers (4), nuts (3) and bolts
(2).
Install a suitable number of tie
straps (1) to
secure harness to
vehicle.
NOTE
Return M10A Forklift to original
equipment condition.
END OF TASK
5-40
|
