| |
TM 10-3930-643-34
ELECTRICAL SYSTEM MAINTENANCE.
5-3.
Main Wiring Harness. (Sheet 10 of 15)
INSTALLATION
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
Position harness (59) throughout
vehicle.
Using a flat tip screwdriver, connect
wire assembly (58) at
terminal to
fuel solenoid.
Position boot (57).
Apply silicone sealant over entire
connection.
Using a 3/8” open end wrench, connect
wire assembly (56) at terminal to top
of fuel level sending unit.
Position boot (55).
Apply silicone sealant over entire
connection.
Using a 3/4”
three wire
terminals to
open end wrench, connect
assemblies (54) at
starter solenoid.
Position boot (53).
Apply silicone sealant over entire
connection.
Go to sheet 11
5-35
|