| |
ELECTRICAL SYSTEM
5-3.
Main Wiring
REMOVAL
TM 10-3930-643-34
MAINTENANCE.
Harness. (Sheet 8 of 15)
24.
Using a
flat tip
screwdriver,
disconnect three wire assemblies (42)
at terminals from engine water
temperature switch.
25.
Using a 9/16 socket
wrench handle, remove
washer (44) and clamp
and
socket
bolt (43),
(45).
26.
Disconnect two wire assemblies
(46
and 47) at connectors from
starter
lockout relays.
27.
Using 1/2 and 3/8 open end
wrenches,
disconnect two
wire
assemblies (48) at
terminals
and
three wire
assemblies (49) at
terminals from magnetic switch.
28.
Using a 7/16 open end wrench,
disconnect wire assembly (50) at
terminal from mounting bracket.
29.
Using a
flat tip
screwdriver,
disconnect two wire assemblies
(51)
at terminals and wire assembly
(52)
at terminal from hydraulic filter
head.
Go to sheet 9
5-33
|