TM  10-3930-643-34 ELECTRICAL  SYSTEM  MAINTENANCE. 5-2. Instrument  Panel  Wiring  Harness.  (Sheet INSTALLATION 9 of 9) 52. 53. 54. 55. 56. 57. 58. 59. 60. Install a suitable number of new tie straps (11) to secure harness leads together. Position instrument panel assembly (4) in operator’s compartment; do not install in housing. Connect wire assemblies (10 and 9) at connectors  to  front lights cable assembly. Connect wire assembly (8) at connector to heater harness. Connect wire assemblies (7 thru 5) at connectors to front lights harness. Spray  all  instrument  panel  electrical connections with anti-corrosive varnish. Position instrument panel assembly (4) in housing. Install four washers (3) and screws (2). Connect  harness assembly (1) at connector  to  intermediate  harness. NOTE Return M10A Forklift equipment  condition. to  original END OF TASK 5-25