| |
TM 10-3930-643-34
ELECTRICAL SYSTEM MAINTENANCE.
5-1.
Starting Motor. (Sheet 4 of 15)
DISASSEMBLY
15.
If necessary, press out bearing (28)
using a suitable driver and press.
16.
Using a flat tip screwdriver, remove
four screws (30) and brushes (31)
from element holder (33).
17.
Remove four springs (32).
18.
Remove washer (34) from starting
motor housing (70).
19.
Using a 1/4” socket head screw key,
remove bolt (35), five bolts (36) and
housing (37).
20.
Remove and discard preformed packing
(38) from housing (37).
Removal of bushing from housing
will cause destruction of bushing.
Remove
only if
inspection
indicates removal is necessary.
22.
Inspect bushing (41).
Replace if
cracked, broken, grooved or scored.
23.
If necessary, press out bushing (41)
using suitable driver and press.
21.
Using an electric drill, drill hole
to pry out cap (39) and wick
(40)
from housing (37).
Discard cap (39)
and wick (40).
Go to sheet 5
5-5
|
