| |
TM 10-3930-643-34
ENGINE, FUEL, EXHAUST AND COOLING TROUBLESHOOTING AND MAINTENANCE. (cont)
4-19.
Fan and Clutch. (Sheet 2 of 4)
DISASSEMBLY (cont)
2.
Using internal snap ring pliers,
remove rings (1 and 2) on armature.
3.
Using a 3/8” open end wrench, remove
four bolts (3), disk (4) from housing
(5).
4.
Press sleeve (6) from bearing (8).
5.
Press bearing (8) from housing (5).
6.
Remove bearing sleeve (9).
7.
Remove shim (7).
8.
Remove two spacers (10) from field and
rotor.
9.
Remove ring (11).
10.
Using a 3/8” open end wrench,
remove
four bolts (12), clutch (13), hub
(14) and disk (15).
11.
Remove ring (16).
12.
Press hub (14) from bearing (17).
13.
Press bearing (17) from disk (15).
Go to sheet 3
4-118
|
