TM  10-3930-643-34 ENGINE,  FUEL,  EXHAUST  AND  COOLING  TROUBLESHOOTING  AND  MAINTENANCE. 4-14. Fuel Injection Pump, Cover Plate, Adapter and Drive Gears. (Sheet 9 of 9) 47. Using a 7/8 socket and socket wrench handle,  hold  pump  shaft  in  position while  installing  install  three  bolts (49) using a 1/2” open end wrench. Tighten three bolts (49) to 30 lb-ft. 48. Perform fuel system hand priming procedure, refer to Fuel System Vent Procedure,  in  TM  10-3930-643-20. NOTE Return M10A Forklift to original equipment  condition. END OF TASK 4-100.1