| |
TM 10-3930-643-34
ENGINE, FUEL, EXHAUST AND COOLING TROUBLESHOOTING AND MAINTENANCE. (cont)
4-13.
Fuel Injector Lines. (Sheet 5 of 5)
INSTALLATION (cont)
14.
Using a 7/16” socket, socket wrench
handle and a 7/16” open end wrench,
install two spacers (13), clamps
(12), nut (11) and bolt (10).
15.
Using a flat tip screwdriver, install
twelve spacers (9), three ClipS (8),
six clamps (7), three retaining clips
(6) and screws (5).
16.
Install two spacers (4), clamps (3),
retaining clip (2) and screw (l).
NOTE
Return M10A Forklift
equipment condition.
to original
END OF TASK
4-92
|
