| |
TM 10-3930-643-34
ENGINE, FUEL, EXHAUST AND COOLING TROUBLESHOOTING AND MAINTENANCE.
4-13.
Fuel Injector Lines. (Sheet 4 of 5)
CLEANING/INSPECTION
9.
Inspect injection pipes (14, 15, 16,
17, 18 and 19). Replace if cracked,
twisted or if inside diameter is
blocked with dirt or
foreign
materiel.
10.
Inspect all parts. Refer to para-
graph 2-9.
INSTALLATION
11.
12.
13.
Using round nose pliers, install five
hoses (22), cap (21) and eleven hose
clamps (20) in right side of engine.
Using a 3/4” open end wrench,
position and connect injection pipes
(19, 18, 17, 16, 15 and 14) to
injection pump. Tighten to 30 lb-ft.
Connect injection pipes (19, 18, 17,
16, 15 and 14) to fuel injectors.
Tighten fittings to 30 lb-ft.
Go to sheet 5
4-91
|
