| |
TM 10-3930-643-34
ENGINE, FUEL, EXHAUST AND
4-11.
Intake and Exhaust
INSTALLATION (cont)
COOLING TROUBLESHOOTING AND MAINTENANCE. (cont)
Manifolds. (Sheet 7 of 7)
25. Using a 1/2” socket and socket wrench
handle, install new gasket
(10),
intake manifold (9), 12 washers
(8)
and bolts (7) in right
side of
engine. Tighten bolts (7) to 20
lb-ft.
26.
Position pipe (6), clamps
(5) and
using a flat tip screwdriver, tighten
clamps (5) at intake manifold (9) and
turbocharger.
27.
Using a 3/8” open end wrench, install
ether nozzle (4) and elbow (3).
28. Connect tube assembly (2) and tighten
nut (1).
NOTE
Return M10A Forklift to original
equipment condition.
END OF TASK
4-82
|
