| |
TM 10-3930-643-34
ENGINE, FUEL, EXHAUST AND
4-6.
Rocker Arm Assembly
INSTALLATION
20.
Slide spring (20) to
COOLING TROUBLESHOOTING
and Valve Cover. (Sheet
AND MAINTENANCE. (cont)
6 of 9)
center of shaft
(24).
Position shaft (24) with side
marked TOP up, as shown.
21.
Install
side of
must be
22.
Install
two rocker arms (18) on each
spring (20).
Adjusting screw
toward assembler, as shown.
two brackets (19) on each
end of spring (20) next to two
rocker arms (18).
Tapped hole must
be away from assembler and the bolt
holes must aline with notches in
shaft (24).
23.
Install four springs (20), ten
rocker arms (18) and four brackets
(19).
Observe order of assembly,
as shown.
24.
Using internal snap ring pliers,
install retaining rings (21 and
17).
Go to sheet 7
4-56
|
