TM   10-3930-643-20 PREPARATION FOR MOVING AND STORAGE. 16-3. Towing. M10A   Forklift   (S/N   2000   and   below) Towing   of   this   vehicle   is   NOT   recommended,   since   towing   lugs   are   not   provided. Normal   servicing   is   to   be   performed   at   the   work   site.   If   major   overhaul   is required,   a   Lowboy   type   truck   is   to   be   used   for   transport. Steel   lifting   eyes are   provided   for   winching   unit   onto   truck. M10A   Forklift   (S/N   2001   and   above) Towing   of   this   vehicle   is   strictly   limited   to   vehicle   breakdown   only.   The towing   speed   is   not   to   exceed    10  mph. Towbar  mounting  lugs  are  located  on  pintle  hook  support  weldment  at M10A   Forklift   and   are   designed   for   use   with   the   MS500048   towbar. A   trailing   vehicle   with   warning,   flashing   or   hazard   lights   and   a Moving   Vehicle   Emblem”    (NSN   9905-01-045-2201)   is   required   behind M10A   Forklift   to   warn   off   a   slow Be   sure   to   install   frame   locking moving   vehicle   in   tow. NOTE bar   before   transport. For   towing,   the   following   procedure   must   be   performed: rear o f “  Slow the 1. Secure   front   and   rear   frames   in   straight   lock   position   with   frame   locking bar. 16-5