| |
TM 10-3930-643-20
BODY, CHASSIS AND HULL ACCESSORY ITEMS TROUBLESHOOTING AND MAINTENANCE.
13-6.
Rear Wipers Hoses, Lines and Fittings
7)
INSTALLATION
38.
Using a 71/16" open end wrench,
install adapter (38) and insert (37).
39.
Connect hose assembly (40).
40.
Using a 1/2" open end wrench,
install nut (36).
41.
Install nipple (35) and hose (34) in
rear wiper assembly on right side.
42.
I n s t a l l e l b o w ( 3 3 ) , i n s e r t ( 3 2 ) ,
hose (31) and nut (30).
43.
Install valve (29), adapter (28) and
i n s e r t ( 2 7 ) .
44.
Connect hose assembly (31).
45.
Using a 7/16" open end wrench,
install nut (26).
46.
Install insert (25), hose (24) and
nut (23).
47.
Install elbow (22) and insert
(21)
on valve (29).
48.
Connect hose assembly (24).
49.
Install nut (20).
50.
Install elbow (19),
i n s e rt
( 1 8 ),
hose (17) and nut (16).
(S/N 2001 and above). (Sheet 6 of
Go to sheet 7
13-27
|
