| |
TM 10-3930-643-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
12-10. Door (S/N 2001 and above).
(Sheet 2 of 5)
REMOVAL
5.
Lift up on upper half of door (6)
and remove.
6.
Using a 1/2" open and box end wrench,
remove four bolts (7), washers (8)
and strap (9) from inside of lower
half of door (10).
7.
Lift up on lower half of door (10)
and remove.
8.
Remove seal (11) from around doorway
of cab.
DISASSEMBLY
9.
Remove window from upper half of
door (6), refer to paragraph 12-8.
10.
Using a flat tip screwdriver, remove
four screws (12), washers (13) and
latch (14) from inside upper half of
door (6).
11.
Remove seal (15) from top edge of
lower half of door (10).
12.
Using a flat tip screwdriver, remove
screw (16) from handle (21) on
outside of lower half of door (10) .
13.
Using a flat tip screwdriver and a
3/8” open and box end wrench, remove
screw (17), nut (18), washer (19),
lockwasher (20) and door handle (21).
Pull sound suppression back to gain
access to nut (18).
14.
Remove bumper (22), nut (23) and
washer (24).
15.
Using a flat tip screwdriver, remove
four screws (26), washers (27) and
latch (28) from inside of lower half
of door (10).
Go to sheet 3
12-48
|
