| |
TM 10-3930-643-20
BODY, CAB, HOOD AND HULL MAINTENANCE. (cont)
12-8.
Windows and Seals (S/N 2001 and above). (Sheet 2 of 3)
REMOVAL
BROKEN GLASS HAZARD
When replacing broken glass, wear
heavy gloves and eye protection.
Remove all glass fragments before
removing seals.
F a i l u r e to
f o l l o w t h i s
procedure could
result in SERIOUS INJURY.
If you
are injured, seek
medical
a id
immediately.
NOTE
The following is a maintenance
p r o c e d u r e f o r o ne
window
assembly.
The maintenance
procedure for the remaining five
window assemblies is identical.
1.
Locate separation point of seal (2)
on
glass
(1)
of
window
to
be
repaired in
o p e r a t o r ’s
compart-
ment.
2.
Using a flat tip screwdriver,
p u ll
tab (A) away from tab (B).
3.
Push tab (B) away from glass (l).
4.
Apply soap and water solution over
glass (1), seal (2), tab (A) and tab
(B).
5.
Gently remove glass (1) from seal
(2), pushing lightly from inside of
cab.
6.
Remove seal (2) from frame.
Go to sheet 3
12-40
|
