| |
TM 10-3930-643-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
12-7.
Platforms and Floor Mats. (Sheet 5 of 6)
INSTALLATION
17.
18.
19.
20.
21.
22.
23.
24.
25.
Using 9/16” socket, socket
wrench
handle and a 9/16” box end wrench,
i n s t a l l r e a r f l o o r p l a t e ( 4 9 ) , f i ve
washers (48), screws (47),
washers
(46) and nuts (45).
Using a 15/16” socket, socket wrench
handle and a 15/16” box end wrench,
install two supports
( 4 4 ) , f o ur
washers (43), screws (42),
washers
(41) and nuts (40).
Using a 9/16” socket, socket wrench
handle and a 9/16” box end wrench,
i n s t a l l t w o w a s h e r s ( 3 9 ) , s c r e ws
(38), washers (37) and nuts (36) to
underside of cab.
Install center floor plates (35 and
34), four washers (33), screws (32)
and nuts (31).
Install washer
clamp (28) and
Install washer
clamp (24) and
( 3 0 ),
s c r e w ( 2 9 ),
nut (27).
(26),
screw
( 2 5 ),
nut (23).
Install two front floor plates (22),
six screws (21), washers (20) and
nuts (19).
I n s t a l l p l a te
( 1 8 ),
m a t ( 1 7 ),
connecting link (16) and mat (15).
Install parking brake linkage
(14)
and pedal assembly (13).
R e f e r t o
paragraph 8-4.
Go to sheet 6
12-37
|
