| |
TM 10-3930-643-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
12-5.
Grille and Supports. (Sheet 3 of 6)
REMOVAL
6.
7.
8.
9.
10.
Using a 9/16” socket, socket wrench
handle and 9/16” box end wrench,
remove two nuts (21), washers (22),
support (23), spacer (24) and two
bolts (25) from top of grille (20).
Using a 3/4”
socket
and
socket
wrench handle, remove
t w o b o l ts
(26), washers (27) and bracket (28)
from right side of frame at rear of
v e h i c l e .
Remove two bolts
and bracket (31)
frame at rear of
(29), washers (30)
f r o m l e f t s i d e of
v e h i c l e.
Using a 9/16” socket and socket
wrench handle, remove three
b o l ts
(32), washers (33) and bracket (34)
from right side of grille (20).
Remove three bolts (35), washers
(36) and bracket (37) from left side
o f g r i l l e ( 2 0 ).
Go to sheet 4
12-23
|
