| |
TM 10-3930-643-20
BODY, CAB, HOOD AND HULL MAINTENANCE. (cont)
12-2.
Cab Sound Suppression. (Sheet 3 of
REMOVAL (cont)
11.
12.
13.
14.
15.
16.
17.
18.
19.
Remove and discard sheet (27) and
strip (28) from inner
r i g ht
side
panel of cab.
Using a 7/16” open end wrench,
remove four screws (29), washers
(30), maintenance case (31) and two
bars (32).
Using a 5/16” open end wrench,
remove four screws (33), washers
(34) and rear sheet (35).
Discard
rear sheet (35).
Remove and discard sheet (36) from
lower left side door panel.
Remove 22 buttons (37), front roof
sheet (38) and insulation (39) from
inner roof of cab.
Using a 3/16” drill,
remove four
rivets (40) and identification plate
(41) from right, inside wall of cab.
Remove and discard decal (42) list-
ing patent markings
and product
graphics.
Using a 5/16” open end wrench,
remove two screws (43), washers
(44), support (45), two strips (46)
and strip (47) from outside,
f r o nt
of cab, beneath window.
Discard two
strips (46 and 47).
Remove four screws (48) and plate
(49) from outside, top of cab.
Go to sheet 4
12-10
|
