| |
TM 10-3930-643-20
FRAME AND TOWING ATTACHMENTS TROUBLESHOOTING AND MAINTENANCE
11-6.
Bolster Lines and Fittings. (Sheet 2
REMOVAL
1.
Using a 5/16” open end wrench,
remove two couplings (1) from inside
bolster frame.
2.
Remove two grease fittings (2) from
couplings (1).
3.
Remove nut (3), washer (4) and clamp
(5) from inside bolster frame.
4.
Remove two elbows (6), tubes (7) and
elbows (8).
CLEANING/INSPECTION
TOXIC/FLAMMABLE
Dry cleaning solvent P-D-680 used
for cleaning parts, is toxic and
flammable.
Use only in well
ventilated areas.
Wear protective
goggles and gloves. Do not smoke
or allow open flames or sparks in
areas where cleaning solvent is
used or stored.
Avoid contact with
eyes,
skin or clothing.
If contact
with eyes is made, flush with cold
water and seek medical attention
immediately.
If contact with skin
or clothing is made, flush with
cold water.
If you become dizzy
while using cleaning solvent, get
fresh air immediately.
of 3)
Go to Sheet 3
11-25
|
