| |
TM 10-3930-643-20
STEERING TROUBLESHOOTING AND MAINTENANCE.
10-9.
Steering Pump to Valve to Hydraulic Pump and Reservoir Hoses, Lines and
Fittings (S/N 2001 and above). (Sheet 3 of
REMOVAL
9.
10.
11.
12.
13.
14.
15.
16.
Using 9/16” open end wrench, remove
elbow (12), tee (13) and preformed
packing (14).
Discard
preformed
packing (14).
Using side cutting pliers, cut and
discard tie straps (15 and 16).
Using a 5/8” open end wrench, remove
hose assemblies (17 and 18) from
ground driven steering pump.
Using a 9/16” open end wrench,
r e m o v e t e e ( 1 9 ) a n d p r e f o r m e d
packing (20).
Discard preformed
packing (20).
Using an 11/16” open end wrench,
remove connector (21) and preformed
packing (22).
Discard preformed
packing (22).
Disconnect wiring harness (23).
Using a 1“ open end wrench, remove
connector (24) and preformed packing
( 2 5 ).
Discard preformed packing
( 2 5 ).
Using a 9/16” socket and socket
wrench handle, remove
f o u r b o l t s
(26), washers (27), block (28) and
preformed packing (29).
Discard
preformed packing (29).
Go to Sheet 4
10-51
|
