| |
TM 10-3930-643-20
STEERING TROUBLESHOOTING AND MAINTENANCE. (cont)
10-7.
Ground Driven Steering Pump (S/N 2001 and above). (Sheet 3 of 8)
REMOVAL (cont)
12.
13.
14.
15.
16.
17.
U s i n g a 1 " o p e n e n d w r e n c h,
disconnect hose assembly (14).
Using a 9/16” open and
remove two bolts (15),
steering pump (16) and
p a c k i n g ( 1 7 ) . D i s c a rd
packing (17).
box end wrench,
ground driven
preformed
preformed
Using a 5/16” socket head screw key,
remove five bolts (18) and adapter
( 1 9 ) .
Using an 11/16” open end wrench,
remove connector (20) and preformed
packing (21) from ground driven
s t e e r i n g p u m p ( 1 6 ).
Discard
preformed packing (21).
Using a 9/16” open end wrench,
remove three bolts (22), block (23)
and seal (24).
Discard seal (24).
Using a 15/16” open end wrench,
remove connector (25) and preformed
packing (26).
Discard preformed
packing (26).
Go to sheet 4
10-34
|
