| |
TM 10-3930-643-20
STEERING TROUBLESHOOTING
10-4.
Steering Linkage.
REMOVAL
AND MAINTENANCE. (cont)
(Sheet 2 of 8)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Using a 1-5/16” socket and socket
wrench handle, remove nut (1) and
l o c k w a s h e r ( 2 ) f r o m c e n t e r of
vehicle, underneath cab.
Using long round nose pliers, remove
and discard cotter pin (3).
U s i n g a 3 / 4 ” s o c k e t a n d s o c k et
wrench handle, remove nut (4) and
pitman arm (5).
Using long round nose pliers, remove
and discard cotter pin (6).
Using a 3/4”
socket
and
socket
wrench handle, remove nut (7)
and
drag link assembly (8).
Using a 5/16” box end wrench, remove
two fittings (9) from drag link
assembly (8).
Using long round nose pliers, remove
and discard cotter pin (10).
Using a 1-1/2”
wrench handle,
washer (12).
socket
and
socket
remove nut (11) and
Using a 9/16” socket and socket
wrench handle, remove three
b o l ts
( 1 3 ) ,
w a s h e r s ( 1 4 ) a n d s h a ft
assembly (15).
Using a 9/16” socket, socket wrench
handle and 3/4” box and open end
wrench, remove locknut (16), washer
(17) and bolt (18).
Remove lever assembly (19).
Go to sheet 3
10-12
|
