| |
TM 10-3930-643-20
STEERING TROUBLESHOOTING AND MAINTENANCE. (cont)
10-3.
Steering Column. (Sheet 2 of 4)
REMOVAL
1.
U s i n g a 1 / 2 ” s o c k e t a n d s o c k et
wrench handle, remove locknuts (1
and 2) from steering gear
f l a n g e,
underneath cab.
Discard locknuts (1
and 2).
2.
Using a 9/16” socket and socket
wrench handle, remove two
locknuts
( 3 ) , w a s h e r s ( 4 ) , b o l t ( 5 ) , b l o ck
(6) and items 7 thru 14 as an
assembly from instrument panel in
i n t e r i o r o f c a b.
Discard two
locknuts (3).
DISASSEMBLY
3.
4.
5.
6.
7.
Using a small flat tip screwdriver,
pry out spring (7) and seat (8).
Using a small flat tip screwdriver
and a small ball peen hammer,
tap
out and discard sleeve bearing (9).
Remove shaft (10), washer (11) and
recessed washer (12).
Using a hacksaw blade, cut into
sleeve ball bearing (13).
Using a cold chisel and medium ball
peen hammer, tap out sleeve ball
bearing (13)
f r o m s l e e v e ( 1 4 ).
Discard sleeve ball bearing (13).
Go to sheet 3
10-8
|
