TM   10-3930-643-20 STEERING  TROUBLESHOOTING  AND  MAINTENANCE.  (cont) 10-2. Steering   Wheel   Assembly.   (Sheet   3   of   3) CLEANING/INSPECTION (cont) 8. Clean   all   other   parts   with   cleaning solvent   P-D-680. Dry   thoroughly with   compressed   air.   Refer   to paragraph   2-8. 9. Inspect   all   parts.   Refer   to paragraph   2-9. ASSEMBLY 10. Using   a   flat   tip   screwdriver,   11/16” socket   and   socket   wrench   handle, install   bushing   (11),   steering   wheel g r i p    ( 1 0 ) ,    s h a f t    ( 9 ) ,    l o c k    w a s h er (8)   and   nut   (7)   in   steering   wheel ( 5 ) . Install   cap   (6). 11. Install   cap   (6) . INSTALLATION 12. Using   a   3/4” socket   and   socket   wrench handle,   install   steering   wheel   (5), washer   (4)   and   nut   (3)   onto   steering column. Tighten nut (3) to 35 l b - f t . 13. Install   ring   (2)   on   cover   (1). 14. Install   cover   (1)   on   steering   wheel ( 5 ). NOTE Return   M10A   Forklift   to   original equipment    condition. END OF TASK 10-6

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business