| |
TM 10-3930-643-20
BRAKE TROUBLESHOOTING AND MAINTENANCE.
8-17.
Air Compressor. (Sheet 3 of 6)
(cont)
REMOVAL (cont)
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Using a 7/16” open end wrench,
disconnect hose (8) at elbow (9).
Remove elbow (9).
Using a 7/8” open end wrench,
disconnect hose assembly (10) at
elbow (11).
Using a 13/16” open end wrench,
remove elbows (11 and 12).
Using a 7/8” open end wrench,
disconnect hose assembly (13) at
elbow (14).
Remove elbow (14).
Using a 9/16” open end wrench,
disconnect hose assembly (15) at
adapter. Remove at elbow (16).
Remove elbow (16).
Using 5/8” and 11/16” open end
wrenches, remove four
n u t s ( 1 7 ),
lock washers (18),
w a s h e r s ( 1 9 ),
bolts (20)
Remove air
Remove and
Remove all
and washers (21).
compressor assembly (22).
d i s c a r d g a s k et
( 2 3 ) .
gasket
m a t e r i a l f r o m
mounting surfaces.
Using long round nose pliers, remove
and discard cotter pin (24) from air
compressor assembly (22).
Hold pulley with strap wrench and
using a 3/4”
socket
and
socket
wrench handle, remove
n u t ( 2 5 ) ,
washer (26) and pulley (27).
Using an 11/16” socket and socket
wrench handle, remove plugs (28 and
29).
Go to sheet 4
8-108
|
