| |
BRAKE TROUBLESHOOTING AND MAINTENANCE.
8–14.
Power Cluster/Pressure Converter
11)
TM 10-3930-643-20
Hoses, Lines and Fittings. (Sheet 10 of
INSTALLATION
67.
Using 5/8”
elbow (27)
tanks.
open end wrench, install
o n r i g h t s i d e of
a ir
68.
69.
70.
71.
72.
73.
74.
75.
76.
77.
78.
79.
80.
Install nut (25) and new sleeve (24)
on tube (26), if removed.
Connect tube (26).
Using 5/8” and 9/16” open end
wrenches, tighten nut (25).
Using an 11/16” open end wrench,
install tee (23) and connector (22).
Using a 5/8” open end wrench,
connect hose assembly (21).
Using an 11/16” open end wrench,
install connector (20).
Install nut (19) and new sleeve (18)
on tube (26), if removed.
Install tube (26).
Tighten nut (19).
Using a 5/8” open end wrench,
i n s t a l l t e e ( 1 7 ) , i n s e r t ( 1 6 ) a nd
elbow (15) in left side of pressure
converter from vehicles
2001 and
above or power cluster from vehicles
2000 and below.
Install nut (13) and new sleeve (12)
on tube (14), if removed.
Connect tube (14).
Using 9/16” and 1/2” open end wrenches,
tighten nut (13).
Go to sheet 11
8-83
|
