| |
TM 10-3930-643-20
BRAKE TROUBLESHOOTING AND MAINTENANCE. (cont)
8-14.
Power Cluster/Pressure Converter Hoses, Lines and Fittings. (Sheet 9 of
11)
INSTALLATION (cont)
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
Using an 11/16” open end wrench,
install tee (40) and connector (39)
in check valve on right air tank.
Install nut (38) and new sleeve (37)
on tube (43), if removed.
Install tube (43).
Using a 5/8” open end wrench~
tighten nut (38).
Using 5/8” open
end wrench and
1 1 / 1 6 ” b o x e n d w r e n c h , i n s t a ll
connector (36).
Install nut (34) and new sleeve (33)
on tube (35), if removed.
Connect tube (35).
Using a 5/8” open end wrench.
tighten nut (34).
Using an 11/16” open end wrench,
install tee (32) and connector (31).
Install nut (30) and new sleeve (29)
on tube (35), if removed.
Install tube (34).
Using a 1-3/8” open
tighten nut (30) and
valve (28).
end
wrench,
i n s t a l l s a f e ty
Go to sheet 10
8-82
|
