| |
TM 10-3930-643-20
BRAKE TROUBLESHOOTING AND MAINTENANCE. (cont)
8-14.
Power Cluster/Pressure Converter Hoses, Lines and Fittings. (Sheet 5 of
11)
REMOVAL (cont)
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
U s i n g a 1 0 ” a d j u s t a b l e w r e n c h,
remove elbow (27) from check valve.
Using a 1-3/8” open end wrench,
remove safety valve (28) and loosen
nut (30) from left
s i d e o f
a i r
tanks.
Disconnect tube (35) with sleeve
(29) and nut (30).
Using side cutting pliers, cut tube
(35) to remove sleeve (29) and nut
( 3 0 ) , i f n e c e s s a r y . D i s c a r d s l e e ve
( 2 9 ).
Using an 11/16” open end wrench,
remove connector (31) and tee (32).
Using a 5/8” open end wrench, loosen
nut (34).
Remove tube (35) with sleeve (33)
and nut (34).
Using side cutting pliers, cut tube
(35) to remove sleeve (33) and nut
( 3 4 ) , i f n e c e s s a r y . D i s c a r d s l e e ve
( 3 3 ).
Using an 11/16” open end wrench,
remove connector (36).
Using a 5/8” open end wrench, loosen
nut (38).
Disconnect tube (43) with sleeve
(37) and nut (38).
Go to sheet 6
8-78
|
