| |
BRAKE TROUBLESHOOTING AND MAINTENANCE.
8-14.
Power Cluster/Pressure Converter Hoses, Lines and Fittings. (Sheet 4 of
11)
REMOVAL
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Using 9/16” and 1/2” open end
wrenches,
loosen nut (13).
Remove tube (14) with sleeve (12)
and nut (13).
Using side cutting pliers, cut tube
(14) to remove sleeve (12) and nut
( 1 3 ) , i f n e c e s s a r y . D i s c a r d s l e e ve
( 1 2 ) .
Using a 3/4” open end wrench, remove
elbow (15), insert (16) and tee (17)
from left side of pressure converter
from vehicles S/N 2001 and above or
power cluster from vehicles S/N 2000
and below.
Using a 5/8” open end wrench, loosen
n u t ( 1 9 ) f r o m r i g h t s i d e o f a i r
tanks.
Disconnect tube (26) with sleeve
(18) and nut (19).
Using side cutting pliers, cut tube
(26) to remove sleeve (18) and nut
( 1 9 ) , i f n e c e s s a r y . D i s c a r d s l e e ve
( 1 8 ).
Using an 11/16” open end wrench,
remove connector (20).
Disconnect hose assembly (21).
Remove connector (22) and tee (23).
Using a 5/8” open end wrench, loosen
nut (25).
Remove tube (26) with sleeve (24)
and nut (25).
Using side cutting pliers, cut tube
(26) to remove sleeve (24) and nut
( 2 5 ) , i f n e c e s s a r y . D i s c a r d s l e e ve
( 2 4 ).
TM 10-3930-643-20
Go to sheet 5
8-77
|
