| |
TM 10-3930-643-20
PRELIMINARY PROCEDURES. (cont)
3-2.
Servicing New Equipment.
Remove protective compounds, refer to DA Form
2258, Depreservation Guide.
WARNING
TOXIC/FLAMMABLE
Dry cleaning solvent P-D-680, used for cleaning parts, is toxic and
flammable. Use only in well ventilated areas. Wear protective goggles
and gloves. Do not smoke or allow open flames or sparks in areas where
cleaning solvent is used or stored. Avoid contact with eyes, skin or
clothing. If contact with eyes is made, flush with cold water and seek
medical attention immediately. I f c o n t a c t w i t h s k i n o r c l o t h i n g is
made, flush with cold water. If you become dizzy while using cleaning
solvent, get fresh air immediately.
a. Remove preservative compounds from metal surfaces with dry cleaning
solvent P-D-680.
b .
Clean all dust and dirt from seat, instrument panel, wiring, engine,
radiator and other parts.
c. Lubricate vehicle in accordance with LO 10-3930-643-12.
3-3.
Initial Checkout and Adjustments.
a.
Inspect equipment for damage from shipping.
damaged, report the damage on DD Form 6, Packaging
DA PAM 700-3 for instructions on preparation of DD
modifications in accordance with DA PAM 738-750.
I f e q u i p m e n t h a s b e e n
Improvement Report. Refer to
Form 6. Report damage or
b .
Check equipment against packing slip. Look for damage and check to see
if vehicle has been modified.
c. Perform PMCS per
3-4.
Maintenance Forms
a . A l l d e f i c i e n c i es
action noted on DA Form
TM 10-3930-643-10.
and Records.
and shortcomings must be recorded as well as corrective
2404 at the earliest possible opportunity.
b .
DA Form 2404, Equipment Inspection and Maintenance Worksheet, is used by
the mechanic to record periodic maintenance services performed and faults
c o r r e c t e d.
The item number on the 2404 must correspond to the item number of
the preventive maintenance check.
3-2
|