| |
TM 10-3930-643-20
BRAKE TROUBLESHOOTING AND MAINTENANCE. (cont)
8 - 8 .
Brake Hydraulic Hoses, Lines and Fittings. (Sheet 9 of 11)
INSTALLATION (cont)
62.
63.
64.
65.
66.
67.
68.
69.
70.
Using a 9/16” socket, socket wrench
handle and a 9/16” open and box end
wrench,
install bolt (37), clamp
(36), washer (35) and nut (34).
Using a 5/8” open end wrench,
install new preformed packing
(33)
and plug (32) on right, rear wheel,
inside of brake housing.
U s i n g a 3 / 4 ” s o c k e t a n d s o c k et
wrench handle, install washer (31),
tee (30), washer (29) and bolt (28).
Using a
connect
Using a
i n s t a ll
washers
of rear
7 / 1 6 ” o p e n e n d w r e n c h,
tube assembly (27).
9/16”
b o x e n d w r e n c h,
access
c o v e r ( 2 6 ) , t w o
(25) and bolts (24) on front
axle on vehicles S/N 2001
and above.
Using a 9/16” socket, socket wrench
handle and a 9/16” open and box end
wrench, install bolt (23), clamp
(22), washer (21) and nut (20).
Using a 7/16” socket and socket
wrench handle, install bracket (19),
washer (18) and bolt (17).
Using a 7/16” socket, socket wrench
handle and a 7/16” open end wrench,
install tee (16), bolt (15), washer
(14) and nut (13).
Using a 7/16” box end wrench,
connect tube assemblies (41 and 27).
Go to sheet 10
8-33
|
