| |
TM 10-3930-643-20
BRAKE TROUBLESHOOTING
8 - 8.
Brake Hydraulic
INSTALLATION
AND MAINTENANCE.
Hoses, Lines and
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
Using an 11/16” socket and socket
wrench handle, install bracket (59),
washer (58) and bolt (57).
Using a 7/16” socket, socket wrench
handle and 9/16” open box wrench,
install tee (56), bolt (55), washer
(54) and nut (53).
Using a 7/16” open end wrench,
connect tube assemblies (81 and 67).
Using a 1/2” open end wrench,
connect tube assembly (52).
Using a 9/16” box end wrench,
install clamp (51), washer (50) and
b o l t ( 4 9 ) o n r i g h t , f r o n t o f
steering cylinder.
Install three new tie straps (48) on
right side of pressure converter/
power cluster.
Using a 1/2” open end wrench,
connect tube assembly (52).
Using a 5/8” box end wrench, install
new preformed packing (47) and plug
(46) on left, rear wheel, inside of
brake housing.
Using a 3/4” box end wrench, install
washer (45), tee (44), washer
(43)
and bolt (42).
Using a 7/16” open end wrench,
connect tube assembly (41).
Using a 9/16” socket and socket
Fittings. (Sheet 8 of 11)
wrench handle, install access cover
(40), two washers (39) and bolts
(38) on front, rear axle on vehicles
S/N 2001 and above.
Go to sheet 9
8-32
|
