| |
TM 10-3930-643-20
BRAKE TROUBLESHOOTING
8 - 8.
Brake Hydraulic
REMOVAL (cont)
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
AND MAINTENANCE. (cont)
Hoses, Lines and Fittings. (Sheet 4 of 11)
Using a 3/4” open end wrench, remove
bolt (42), washer (43), tee (44) and
washer (45).
Using a 5/8” box end wrench, remove
plug (46) and preformed packing
( 4 7 ).
Discard preformed packing
( 4 7 ).
Using a 1/2” open end wrench,
disconnect tube assembly (52) from
right side of pressure
c o n v e r t e r/
power cluster.
Using side cutting pliers, cut and
discard three tie straps (48).
Using a 9/16” box end wrench, remove
bolt (49), washer (50) and clamp
( 5 1 ) f r o m r i g h t , f r o n t s i d e of
steering cylinder.
Using a 1/2” open end wrench, remove
tube assembly (52) rear of front
a x l e.
Using a 7/16” open end wrench,
disconnect tube assemblies (67 and
81).
Using an
11/16" socket, socket wrench
handle and a 9/16” open and box end
wrench,
remove nut (53), washer (54),
bolt (55) and tee (56).
Using a 9/16” socket and socket
wrench handle, remove bolt (57),
washer (58) and bracket (59).
Using a 9/16” socket, socket wrench
handle and a 9/16” open and box
end wrench,
remove
n u t ( 6 0 ) ,
washer (61), clamp (62) and bolt
( 6 3 ).
Go to sheet 5
8-28
|
