| |
TM 10-3930-643-20
PROPELLER AND PROPELLER SHAFTS TROUBLESHOOTING AND MAINTENANCE.
7-2.
Propeller Shaft (Torque Converter to Transmission). (Sheet 1 of 6)
This task covers:
a. Removal
b.
Disassembly
c . C l e a n i n g / I n s p e c t i o n d . A s s e m b l y
e .
I n s t a l l a t i on
INITIAL SETUP
Tools
Shop Equipment, Automotive
Maintenance and Repair:
Organizational Maintenance,
Common No. 1, Less Power
NSN 4910-00-754-0654
Tool Kit, General Mechanic’s
Automotive
NSN 5180-00-177-7033
Wrench,
open end
NSN 5120-00-277-2322
Materials/Parts
Cleaning solvent P-D-680
(App. C, Item 2)
Clean cloth (App. C, Item 10)
Grease (App. C, Item 3)
Wood block (4)
Locknut (5)
Seal
Torques
Bolts (2, 3, 8 and 10) to 20 lb-ft
Locknut (4) to 20 lb-ft
REMOVAL
W A R N I N G
Make sure that vehicle will not
r o l l o r s h i f t.
Secure with wood
blocks .
DEATH
or serious injury may result by
your failure
t o f o l l o w t h i s
procedure.
1.
Using a 1/2” box end wrench, 1/2”
socket and socket wrench handle,
remove four locknuts (1) and bolts
(2) from torque converter output
yoke.
Discard four locknuts (1).
G o t o s h e e t 2
7-3
|
