| |
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE.
6-2.
Transmission Shifting Components. (Sheet 5 of 11)
REMOVAL
20.
21.
22.
23.
24.
25.
26.
27.
28.
U s i n g 5 / 8 " a n d 1 1 / 1 6 " s o c k e ts
socket wrench handle and 11/16" open
end wrench,
remove nut (39), washer
(40), clamp (41), bolt (42), washer
(43) and clamp (44) from beneath
floor on left side of cab.
Using long round nose pliers, remove
cotter pin (45) and pin (46) from
transmission.
D i s c a r d c o t t e r p in
(45).
Using a 1/2” open end wrench, loosen
nut (48).
Using 1/2” and 1“ open end wrenches,
remove clevis (47), nuts (48 and 49)
and lock washer (50).
Disconnect cable assembly (51) from
transmission control valve.
Using long round nose pliers, remove
c o t t e r p i n ( 5 2 ) a n d p i n ( 5 3 ) .
Discard cotter pin (52).
Using a 1/2" open end wrench, loosen
nut (55).
Using 1/2" and 1" open end wrenches,
remove clevis (54), nuts (55 and 56)
and lock washer (57).
Disconnect cable assembly (58) from
transmission control valve.
TM 10-3930-643-20
Go to sheet 6
6-7
|
