| |
TM 10-3930-643-20
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE. (cont)
6-2.
Transmission Shifting Components. (Sheet 4 of 11)
REMOVAL (cont)
11.
12.
13.
14.
15.
16.
17.
18.
19.
Remove two bearings (18) and using
a 7/16" box end wrench, remove
f i t t i n g ( 1 9 ) .
Discard two bearings
( 1 8 ).
Remove two bearings (20) and using a
7/16" box end wrench, remove fitting
( 2 1 ).
Discard two bearings (20).
Using a 7/16" box end wrench and
7 / 1 6 ” s o c k e t a n d s o c k e t w r e n ch
handle, remove two nuts
( 2 2 ),
washers (23), bolts (24),
washers
(25) and bracket (26) on left side
of instrument panel housing.
Using a 7/16" socket and socket
wrench handle, remove
t w o b o l ts
(27), washers (28) and hinge (29).
Using a 1" open end wrench,
loosen
nut (31).
Using a 1/2" open end wrench, remove
bearing (30), nuts (31 and 32) and
lock washer (33).
Loosen nut (35).
Using a 1“ open end wrench,
remove
bearing (34), nuts (35 and 36) and
lock washer (37).
Cut and discard two tie straps (38).
Go to sheet 5
6-6
|
