| |
ELECTRICAL SYSTEM TROUBLESHOOTING AND MAINTENANCE.
5-35.
Stop/Taillights, Blackout Stop/Taillights and
REMOVAL (cont)
6.
Cut and discard tie strap (9).
7.
Disconnect two wire assemblies (10)
at connectors.
8.
Using a 9/16” open end wrench,
remove two bolts (11), lock washers
(12) and items 19 thru 30 as an
assembly.
9.
Using two 9/16” open end wrenches,
remove five nuts (13), washers (14),
clamp (15), five bolts (16), washers
(17) and support (18).
DISASSEMBLY
10.
11.
12.
13.
14.
Using a flat tip screwdriver, loosen
six screws (22) which
a r e h e ld
captive and are
removed
together
with door (19) from housing (30).
Remove door (19) and seal (20).
Using a flat tip screwdriver and
long round nose pliers, remove six
washers (21) and screws (22) from
door (19).
U s i n g a c r o s s t i p s c r e w d r i v e r,
remove two screws (23), lock washers
(24), three screws (25), lampholder
( 2 6 ) a n d t w o l a m p s ( 2 7 ) f r om
h o u s i n g ( 3 0.
Remove two wire assemblies (28) at
connectors and washers (29).
TM 10-3930-643-20
Mounting. (Sheet 3 of 6)
Go to sheet 4
5-179
|
