| |
TM 10-3930-643-20
ELECTRICAL SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
5-18. Circuit Breakers. (Sheet 3 of 8)
REMOVAL (cont)
8.
U s i n g a 3 / 8 ” s o c k e t a n d s o c k et
wrench handle, remove three nuts
(14) and lock washers (15).
9.
Disconnect wire assembly (16) at
terminal.
10.
Remove bus (17).
11.
12•
13.
14.
15.
16.
17.
18.
19.
20.
Remove nut (18) and lock washer
( 1 9 ).
Disconnect wire assembly
( 2 0 ) at
terminal.
Remove four circuit breakers (21)
from vehicles S/N 2001 and above or
t h r e e c i r c u i t b r e a k e r s ( 2 2 ) f r om
vehicles S/N 2000 and below.
Remove circuit breakers (23 and 24).
U s i n g a 3 / 8 " s o c k e t a n d s o c k e t
handle and cross tip screwdriver,
remove two nuts (25), lock washers
(26), screws (27) and bracket (28).
Disconnect four wire assemblies (29)
at terminals.
Remove four nuts (30) and lock
washers (31).
Disconnect four wire assemblies (32)
at terminal.
Remove four semiconductors (33).
Remove two nuts (34), lock washers
(35), screws (36) and bracket (37).
Go to sheet 4
5-118
|
