| |
TM 10-3930-643-20
ENGINE, FUEL, EXHAUST AND COOLING TROUBLESHOOTING AND MAINTENANCE. (cont)
4-17.
Air Cleaner Assembly and Mounting.
INSTALLATION
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Using a 9/16 socket, socket wrench
h a n d l e a n d b o x w r e n c h , i n s t a ll
bracket (21), three spacers (20 and
1 9 ) , w a s h e r s ( 1 8 ) , b o l t s ( 1 7 ),
spacers (16) and nuts (15).
Using a 9/16 socket and socket
wrench handle, install body
( 1 4 ),
two washers (13) and bolts (12).
Using a 9/16 s o c k e t a n d s o c k e t
wrench handle, install two
washers
(11) and bolts (10).
Install filter assembly (9).
Using a 9/16 socket and socket
handle and a 9/16 open and box
wrench, tighten clamp (8).
wrench
end
(Sheet 4 of 4)
Apply liquid gasket to clamp (7)
mounting surface of intake pipe.
Using a 5/16 flat tip screwdriver,
tighten clamp (7).
U s i n g a f l a t t i p s c r e w d r i v e r,
install clamp (6), adapter (5) and
clamp (4).
Position air precleaned hood (3) on
air cleaner filter assembly on rear
of vehicle above hood.
Using a 9/16 socket and box wrench,
tighten nut (2) and clamp bolt (1).
NOTE
Return M1OA Forklift
equipment condition.
t o o r i g i n al
END OF TASK
4-71
|