| |
TM 10-3930-643-20
ENGINE, FUEL, EXHAUST AND COOLING TROUBLESHOOTING
4-10
Oil Lines and Fittings. (Sheet 3 of 10)
REMOVAL (cont)
AND MAINTENANCE. (cont)
Fuel Injection Pump Oil Lines
5.
6.
7 .
8.
9 .
10.
11.
Using 9/16” box wrench and 9/16”
open end wrench, remove
n u t ( 6 ) ,
lock washer (7), bolt (8),
spacer
( 9 ) a n d c l a m p ( 1 0 ) f r o m a ir
compressor bracket.
Using a 9/16” socket, socket wrench
handle and 9/16” box wrench, remove
n u t ( 1 1 ) , w a s h e r ( 1 2 ) , b o l t ( 1 3 ),
washer (14) and clamp (15) from
lower right side of engine.
Using 9/16” and
1/2”
open
end
wrenches, loosen two nuts (43 and
44) at hose assembly (17) and nut
(45) at elbow (24).
Remove tube assembly (16).
Using 9/16” and 11/16” open end
wrenches, remove hose assembly (17).
Using a 9/16” open end wrench,
remove elbow (18).
Using a 9/16” socket and socket
wrench handle, remove bolt (19),
washer (20) and plate (21).
G O to sheet 4
4-34
|
